New: ASCloud, our paperless food safety system. Full document FSMS from R3,800 a month, R638 plans from R499. See pricing

When a nutrition table is required on South African labels

Under the labelling regulations in force today, R146 of 2010 as amended, a nutritional information table is compulsory only when the label makes a nutrition claim. Claims such as “high in fibre”, “low fat” or “source of protein” all trigger it. A plain label with no claim does not need a table, except on foods for infants and young children, where R991 of 2012 requires one.

Two things make the table worth getting right anyway. Many manufacturers print a table even without a claim, and regulation 50(1) applies the same rules to a voluntary table as to a compulsory one. And the draft regulations, R3337, would make a table mandatory on almost every prepackaged food. If a label review is on your list for next year’s artwork, start with the table.

In short

  • R146 makes the table compulsory when a nutrition claim is made (regulation 50(12)), and for fortification and comparative claims.
  • A voluntary table must follow the same format, order and rounding rules as a compulsory one.
  • Energy is declared in kilojoules, worked out with the Annexure 2 factors, including 17 kJ per gram for protein and carbohydrate, 37 kJ per gram for fat and 8 kJ per gram for dietary fibre.
  • With a claim, the values must come from a laboratory accredited for the method by SANAS or another recognised accreditation body, and be verified at least every three years.
  • Draft R3337 would make the table mandatory on nearly all labels. It is still a draft, tabled at NEDLAC on 26 August 2026.

When R146 makes the table compulsory

The main trigger is regulation 50(12). Where a nutrition claim is made, the table must appear, and a nutrition claim in R146 means a nutrient content claim or a comparative claim. Three related provisions add to it.

  • A claim about a fortified food vehicle needs nutritional information per daily serving and per 100 g (regulation 51(2)).
  • A comparative claim such as “reduced fat” needs nutrition information for both foods being compared (regulation 53(1)(d)).
  • Foods that regulation 54(3) exempts from labelling, such as eggs and fresh fruit and vegetables, must carry the mandatory nutritional information once a nutrition claim is made.

In practice the trigger is often the marketing team, not the technical team. A new pack design adds “now with more protein” to the front, and the back of pack has no table, or a table from the old recipe. Our guide to health and nutrition claims sets out which claims are allowed and the conditions for each.

What the nutritional information table must look like under R146

Annexure 2 to R146 sets the format. The heading is “Typical nutritional information”. Values are given per 100 g or 100 ml and per single serving, with the serving size stated, as regulation 50(1) requires. The nutrients follow a fixed order.

  1. Energy (kJ)
  2. Protein (g)
  3. Glycaemic carbohydrate, or carbohydrate (g), of which total sugar (g)
  4. Total fat (g), of which saturated fat (g)
  5. Dietary fibre (g)
  6. Total sodium (mg)

Trans fat, fat subgroups and cholesterol, when declared, go between saturated fat and dietary fibre. Vitamins, minerals and other nutrients come after sodium. The words “or carbohydrate” were added by the R45 amendment of 2012, which also allows carbohydrate to be calculated by difference where no claim is made (regulation 50(13)(a)(ii)). Showing the percentage of the nutrient reference value is optional under regulation 50(6).

Energy must always be declared in kilojoules (regulation 50(3)(a)). A table that shows only kilocalories, which is common on imported products, does not comply. A linear format, where the values run across in a sentence instead of a table, is allowed only when no claim is made and the pack is so small that less than 900 mm² of label space remains once the other compulsory information is on it (regulation 50(13)(b), as renumbered by R1091).

A worked example of the energy calculation

Take a breakfast cereal with these typical values per 100 g, from laboratory analysis: protein 8.0 g, glycaemic carbohydrate 60 g, fat 10.0 g and dietary fibre 8.0 g. Using the Annexure 2 factors, the energy works out like this.

Per 100 gAmountFactorEnergy
Protein8.0 g17 kJ/g136 kJ
Glycaemic carbohydrate60 g17 kJ/g1,020 kJ
Fat10.0 g37 kJ/g370 kJ
Dietary fibre8.0 g8 kJ/g64 kJ
Total1,590 kJ
Annexure 2 energy factors applied to the example cereal.

With a 40 g serving, the per serving figure is 636 kJ, rounded to the nearest kilojoule. Leave the fibre out and the label understates the energy. If the laboratory gives carbohydrate by difference, the fibre is still inside that figure, so take it out and count it at 8 kJ, not 17 kJ. Annexure 2 also has factors for alcohol, polyols and organic acids, so a product containing them needs those added as well.

Rounding follows regulation 50(5) and Annexure 6. Energy goes to the nearest 1 kJ, carbohydrate to the nearest 1 g, and protein, sugars, fats and fibre to the nearest 0.1 g. Sodium goes to the nearest 1 mg.

The word “trace” is not allowed. Where a value is below what the method can measure, regulation 52(5)(b) allows a “less than” figure instead, quoting the lowest value on the laboratory’s calibration curve. Vitamins and minerals below 5 per cent of the NRV per serving may not be declared (regulation 52(7)).

Laboratory analysis or calculation

This is where the rules split, and where most of the cost sits. ASC is not a testing laboratory, but our labelling team can scope the testing with you, interpret the results and turn them into an artwork-ready table.

When a claim is made, regulation 50(12)(a) requires real, typical values determined by a reputable laboratory. R146 defines that as a laboratory accredited for the specific method by SANAS, or by another accreditation body that is a member of ILAC and part of the ILAC Arrangement. ILAC ceased operating on 1 January 2026 and its arrangement now sits with the Global Accreditation Cooperation (Global ACI). R146 has not been updated, so SANAS accreditation for each method used is the safest choice.

The sample should be a composite drawn from several batches, and the values must be verified at least once every three years (regulation 50(12)(b)(iii)). Change the ingredients and regulation 50(9) requires the product to be re-analysed and relabelled, so put the recipe version number on every laboratory report.

When no claim is made, regulation 50(13)(a) is more flexible. Single ingredient agricultural commodities may use the latest edition of the MRC food composition tables. Other foods may use in-house data, laboratory analysis, or a calculation from the analytical values of each ingredient, taken from the supplier’s ingredient information. SAFOODS, the South African Medical Research Council’s food composition database, offers a free online search that covers five nutrients only: energy, carbohydrate, protein, fat and fibre.

Whichever route you use, the calculation has to follow the product through the process. A biscuit dough that loses 10 per cent of its weight as water in the oven is about 11 per cent more concentrated per 100 g once baked, so a table worked out on the dough recipe understates every nutrient.

One practical warning. Some unofficial online consolidations of R146 still show wording that the R1091 amendment deleted in 2010. Work from the gazetted text of R146 read with R1091 and R45. Our guide to working with food testing laboratories covers what to ask the lab before you send the samples.

Sodium, salt and serving size

The table line is “Total sodium (mg)”. R146 has no provision for declaring salt in the table, even though many brand owners would prefer it. R146 defines salt as sodium chloride with a sodium to chloride ratio of 40 to 60, which is useful when you check a recipe against the analysed sodium figure. Salt is rarely the only source, though. Bicarbonate of soda, sodium raising agents and preservatives, MSG, cheese and stock powders all add sodium.

The manufacturer sets the serving size, but regulation 50(8)(a) says it must not encourage “supersize” servings. A 250 g serving for a 250 g bag of crisps will be questioned. Keep the scientific, evidence based documentation that justifies the serving size with the label file, because regulation 50(8)(b) requires it.

What draft R3337 would change

The draft R3337 regulations, published for comment on 21 April 2023, would turn the table from an occasional requirement into a near universal one. Regulation 46(1) of the draft says a nutritional information table is mandatory on all foodstuff labels.

There are exceptions. Small producers classed as qualifying small enterprises or exempt micro enterprises, street vendors, and foods in the draft’s Table 1 (honey, herbs and spices, plain tea, coffee and beer among them) are excluded. Bread with no claim other than the fortification logo would need only sodium to be analysed (regulation 46(2)).

The format changes too. The heading becomes “(Typical) nutritional information/facts”, with servings per pack and a household measure added. Values stay per serving and per 100 g or 100 ml. Salt may be shown next to sodium. Regulation 46(3)(g) says no deviation from the Annexure 2 formats is permitted, so a table designed to fit the artwork will not do.

The calculation rules tighten as well. Under draft regulation 47, a single sample would never be acceptable, sugars, sodium and fat could never be shown below the analysed value, and recipe calculations from raw ingredients would need yield and retention factors where they apply. The front-of-pack warning labels in draft regulation 51 would sit on top of the table, not replace it. We set out the warning label cut-offs in our R3337 guide and in our article on cutting sugar in drinks and snacks.

R3337 is still a draft. It was tabled at NEDLAC’s Trade and Industry Chamber on 26 August 2026 and, as Daily Maverick reported on 7 October 2026, has no firm publication date. The Department of Health says its review has led to amendments that have not been published, so the final text may differ from the 2023 draft. As drafted, regulation 77 brings most of it into force 24 months after final publication, the claims rules in regulations 49 to 73 after 12 months (51 and 52 excepted), and regulations 8, 51 and 52, which include the front-of-pack warning labels, after six months.

Check these before the artwork goes to print

  1. If there is a nutrition claim anywhere on the pack, including the front and any promotional flash, is there a table?
  2. Is energy shown in kJ, using the Annexure 2 factors, with fibre counted?
  3. Are the nutrients in the R146 order, with sugars under carbohydrate and saturated fat under total fat?
  4. Are there values per 100 g or 100 ml and per serving, with a serving size you can justify?
  5. Are the rounding rules followed, with no “trace” and no vitamins or minerals below 5 per cent of the NRV?
  6. If a claim is made, is there a current accredited laboratory report from a composite sample, less than three years old and for the current recipe?

If any answer is no, fix it before the files go to the printer. A reprint costs far more than a review, and if the artwork is already with the printer, ask for the 48 hour express label review. Our guide to ingredient lists under R146 covers the other panel on the back of the pack.

Why food businesses choose ASC

Rated 4.9 out of 5 from more than 400 Google reviews across our three offices.

Gqeberha Google reviews Johannesburg Google reviews Cape Town Google reviews

Our online courses are rated 4.9 on average across 2,586 course reviews, from more than 7,100 enrolments.

ASC is ISO 9001 certified, a SAATCA registered online training course provider (TC 065), a FoodBev SETA accredited provider (No. 587/00337/1900) and an Exemplar Global Recognised Training Provider.

Label review

Have your nutrition table and claims checked before you print

ASC reviews the full label against R146, including the nutritional information table, the claims it supports and the NRV values, with every finding tied to the regulation and the fix written next to it. We can also build an artwork-ready table from your formulation where no claim is made, tell you exactly what to send to an accredited laboratory where one is, and verify the table you already have. Official food safety and compliance advisor to Kellogg’s.

Standard review in five to seven business days, or 48 hours on the express option. Free, no obligation quote.

Get a label review quote WhatsApp us your label

Training the people who write your labels? Food Labelling Courses Bundle, from Essentials to Advanced (R4,463 online for three courses, R5,950 bought separately).

Only need the advanced course? Advanced Food and Beverage Labelling, whose Module 2 builds a nutrition table from scratch (R2,950 online).

Questions we are often asked

Is a nutritional information table compulsory in South Africa?

Under R146, only when the label makes a nutrition claim, or a fortification or comparative claim, and on foods for infants and young children under R991. A voluntary table must still follow the R146 format and rounding rules. Draft R3337 would make it compulsory on almost all prepackaged foods, but it is not yet law.

Can I calculate the values instead of sending samples to a laboratory?

If no claim is made, R146 allows calculation from supplier ingredient values, in-house data or the MRC tables for single ingredient commodities. If a claim is made, the values must come from a laboratory accredited for the method by SANAS or another recognised accreditation body, and be verified at least every three years.

Can I show kilocalories instead of kilojoules?

Energy must be declared in kilojoules under regulation 50(3)(a). A kilocalorie figure on its own does not comply.

Can I declare salt instead of sodium?

Not under R146, which uses “Total sodium (mg)” in the table. Draft R3337 would allow salt to be shown next to sodium.

Sources

  1. Department of Health, Regulations relating to the labelling and advertising of foodstuffs, R146, Government Gazette No. 32975, 1 March 2010, regulations 1, 50 to 54 and Annexures 2 and 6
  2. Department of Health, Amendment R1091, Government Gazette No. 33776, 19 November 2010
  3. Department of Health, Amendment R45, Government Gazette No. 34957, 19 January 2012
  4. Department of Health, Draft regulations relating to the labelling and advertising of foodstuffs, R3337, Government Gazette No. 48460, 21 April 2023, regulations 46, 47, 51 and 77
  5. Department of Health, Regulations relating to foodstuffs for infants and young children, R991 of 2012
  6. Thabo Molelekwa, Daily Maverick, Three years, 6,000 pages, no labels: Who’s stalling SA’s food warnings?, 7 October 2026
  7. South African Medical Research Council, SAFOODS food composition database

Leave a Comment

I accept the Terms and Conditions and the Privacy Policy

Exemplar Global Recognised Training Provider (RTP) badge issued to ASC Food Safety
International recognitionExemplar Global Recognised Training Provider (RTP)Exemplar Global, the international organisation that certifies auditors and recognises training providers, recognises 28 of our auditor, HACCP, GMP and ISO courses, including four lead auditor courses, whether we deliver them in class, in live virtual classes or online.
News & updates 5 new
4.9/5 what do you need today?