Acrylamide forms when the amino acid asparagine reacts with reducing sugars such as glucose and fructose when food is fried, baked or roasted, mostly above about 120 °C and once the food has dried out. You reduce it by starting with raw materials that are low in those reactants, cooking to a lighter colour at controlled temperatures, adjusting the recipe where you can, and testing to prove the changes work.
South Africa has no regulation that sets a maximum level for acrylamide in food. That does not make it optional. A food safety system certified to FSSC 22000 or ISO 22000 has to consider chemical hazards that form during processing, retailers increasingly ask about it, and EU buyers pass on the requirements of Regulation (EU) 2017/2158, which has required mitigation measures and benchmark levels from EU food businesses since 11 April 2018.
If you already have a test result you are not comfortable with, our food scientists can work out where the acrylamide is coming from and what to change first.
In short
- Acrylamide comes mainly from asparagine plus reducing sugars in the Maillard reaction, at high temperature and low moisture.
- South Africa sets no legal limit. EU Regulation 2017/2158 binds EU food businesses, and EU buyers pass it on to exporters, with benchmark levels such as 750 µg/kg for potato crisps and 350 µg/kg for biscuits.
- Store processing potatoes above 6 °C, recondition cold stored potatoes at about 12 to 15 °C, and fry chips from no more than 170 to 175 °C to a golden-yellow colour.
- In bakery, reduce ammonium bicarbonate and fructose-rich syrups, give yeast doughs time to use up asparagine, and lower the temperature in the final, dry stage of baking.
- Colour is a useful daily check, but only a laboratory result on your own product proves the level.
How acrylamide forms in food
Acrylamide is a by-product of the browning that gives cooked foods their colour and flavour. In the Maillard reaction, reducing sugars react with amino acids. When the amino acid is asparagine, one of the reaction pathways produces acrylamide. The Codex Code of Practice for the reduction of acrylamide in foods (CXC 67-2009) notes that formation mainly takes place above about 120 °C and at low moisture.
That explains where it turns up. Boiled potatoes contain almost none, because water keeps the surface near 100 °C. The same potato fried into chips or crisps, where the surface dries and climbs well past 120 °C, can contain a great deal. Bread crumb contains little, while the crust and toast carry most of it. Coffee beans form acrylamide early in roasting, and some of it breaks down again as the roast goes on.
Two things make it hard to control. First, the reactants vary naturally. Codex reports asparagine in wheat ranging from 75 to 2,200 mg/kg and in maize from 70 to 3,000 mg/kg, and reducing sugars in potatoes rise sharply in cold storage. In potatoes the sugars are usually the limiting reactant, while in cereal products it is the asparagine, which is why the controls differ.
Second, formation accelerates once the surface dries and its temperature climbs past 100 °C, so the last minute of frying or baking often matters more than the first ten.
Is acrylamide regulated in South Africa?
There is no South African regulation under the Foodstuffs, Cosmetics and Disinfectants Act that sets a maximum level for acrylamide. The new mycotoxin regulations, which we cover in our guide to the new mycotoxin limits, deal with toxins from moulds, not with contaminants formed during cooking.
The hazard still has to be managed. ISO 22000:2018 clause 8.5.2.2 requires the food safety team to identify the hazards reasonably expected for each product and process, and a process contaminant formed in your own fryer or oven is exactly that. An FSSC 22000 auditor will expect to see acrylamide considered in the hazard analysis of a crisp or biscuit line.
The conclusion can be that it is not significant and is managed through prerequisite programmes. Where the assessment finds it significant, the fryer or oven temperature and the finished colour limit become an operational prerequisite programme (OPRP) with action criteria, monitoring and records under clause 8.5.4. Our guide to CCPs and OPRPs explains the difference.
The European Food Safety Authority concluded in 2015 that current dietary exposure indicates a concern for cancer effects, based on animal studies, and the International Agency for Research on Cancer classifies acrylamide as probably carcinogenic to humans (Group 2A). The case for keeping levels as low as reasonably achievable is settled, even where the law is silent.
What EU buyers expect from South African exporters
Regulation (EU) 2017/2158 requires EU food businesses that make the listed foods to apply mitigation measures and bring acrylamide as low as reasonably achievable below set benchmark levels. Benchmark levels are performance indicators, not maximum limits, but a result above the benchmark obliges the business to review its measures without delay. An EU importer will pass those obligations to you through its specification and will want to see your results.
| Food | Benchmark, µg/kg |
|---|---|
| French fries, ready to eat | 500 |
| Potato crisps from fresh potatoes or potato dough, potato based crackers and other potato dough products | 750 |
| Soft bread, wheat based | 50 |
| Biscuits and wafers | 350 |
| Crackers, excluding potato based | 400 |
| Crispbread | 350 |
| Gingerbread | 800 |
| Breakfast cereals, maize, oat, spelt, barley and rice based (not wholegrain or bran) | 150 |
| Roast coffee | 400 |
| Instant (soluble) coffee | 850 |
| Coffee substitutes made only from cereals | 500 |
| Coffee substitutes made only from chicory | 4,000 |
| Biscuits and rusks for infants and young children | 150 |
The Commission is now reviewing the framework. Its acrylamide page says maximum levels for processed cereal-based foods for infants and young children are under discussion, and industry testing bodies reported in 2026 that binding maximum levels for selected foods and revised benchmark levels are being prepared. None had been adopted at the time of writing. If you export, plan as if your current benchmark will become a legal limit.
How to reduce acrylamide in chips and crisps
Potato products give the biggest gains, because most of the control sits with raw material and frying.
Start with storage. Codex identifies storage above 6 °C as good practice for potatoes held for processing, because at or below 4 to 6 °C starch converts to reducing sugars, a process called low temperature sweetening. Potatoes that have been cold stored can be reconditioned for a few weeks at about 12 to 15 °C to bring sugars back down. Some cultivars sweeten less than others, so ask your growers what they plant for the frying market.
South Africa harvests potatoes from different regions through most of the year, so the risk follows the region, the season and how each lot was held, not one annual store. Check every load. A fry test of a few slices against a colour chart, or a reducing sugar measurement, tells you before production whether a load is fit for frying. Loads that fail can go to a product that is not fried, or be reconditioned first.
Blanching or washing leaches sugars and asparagine from the cut surface of French fries, though Codex warns it may not suit crisps. Treatment with sodium acid pyrophosphate or calcium salts late in blanching lowers the surface pH, which slows formation further.
For French fries, Codex advises setting the initial oil temperature at no more than 170 to 175 °C and cooking to golden-yellow rather than golden-brown. Size the basket load so the oil starts at about 140 °C once the potatoes go in and finishes at about 160 °C. For crisps, Codex points to controlling the heat input, flash frying with rapid cooling and in-line optical sorting to remove dark crisps.
If you sell par fried chips, your on-pack frying instruction should say no more than 175 °C and tell the user to cook to golden-yellow. For a quick service restaurant, the same rule belongs in the fryer procedure and the colour chart pinned beside the fryer.
How to reduce acrylamide in bread, biscuits and rusks
In bakery the asparagine in the flour is usually the limiting reactant, so recipe and process both count. White, lower extraction flours contain much less asparagine than wholemeal flours, because free asparagine is concentrated in the bran and germ. Codex also reports that part replacement of wheat flour with rice flour has reduced acrylamide in biscuits and gingerbread. Balance that against the fibre and the claims on your label.
Ammonium bicarbonate increases acrylamide formation in baked goods. Where the product allows, replace some of it with sodium bicarbonate and an acidulant such as sodium acid pyrophosphate, balanced to the acid’s neutralising value, because unreacted soda tastes soapy and darkens the bake. Where sodium matters, potassium bicarbonate with potassium bitartrate is an alternative Codex lists.
Look at the sugars as well. Fructose forms more acrylamide than glucose, so golden syrup, invert syrup and honey, all common in South African rusks and biscuits, are worth reviewing. Codex reports success from replacing them with glucose or with sucrose, which is not a reducing sugar, where colour allows.
In yeast-raised bread, fermentation uses up free asparagine. Codex reports that two hours of fermentation used most of it in wheat dough models, while shorter times were less effective. The enzyme asparaginase converts asparagine into aspartic acid before it can react, and it works well in doughs. Check with your enzyme supplier that the preparation and its use are permitted for your product in South Africa and in any export market.
Finally, look at the baking profile. Acrylamide forms fastest once the product has dried out, so Codex advises lowering the temperature in the final stages of baking and, if needed, raising it earlier, while there is still enough moisture to prevent formation.
For rusks, colour and acrylamide can come from the crust of the first bake and from the long drying stage. Measure colour after each stage to find which one adds it, then lower that stage’s temperature and lengthen its time so the rusk still reaches its moisture specification, because a wetter rusk loses its crunch and its shelf life.
Acrylamide in maize snacks, coffee and chicory
Extruded maize snacks and corn chips follow the same chemistry, and maize can be high in asparagine. Raw material choice and the frying temperature are the main controls, backed by a finished colour limit.
Coffee is harder, because roasting changes taste. Annex I of Regulation 2017/2158 still requires roasters to identify the roast conditions that keep acrylamide down within the target flavour, control them as a prerequisite programme and consider asparaginase. It also notes that Robusta tends to run higher than Arabica, which matters when you set a blend.
Chicory deserves attention in South Africa, where coffee and chicory mixtures are common and regulated under the coffee and chicory regulations (R1154 of 2020). The EU benchmark for coffee substitutes made only from chicory is 4,000 µg/kg, eight times the 500 µg/kg for substitutes made only from cereals, so the chicory share of a blend has a large effect on its result. For chicory, Annex I requires cultivars low in asparagine and no late or excessive nitrogen feeding.
A worked example from a South African crisp line
Take an illustrative case. A Gauteng crisp manufacturer is preparing its first shipment to an EU retailer. The buyer asks for acrylamide results, and the first composite sample, taken in July from a lot the supplier had cold stored at 4 °C to bridge a gap between growing regions, comes back at 1,100 µg/kg against the 750 µg/kg benchmark. That is about 47 per cent above the benchmark.
The team does not start by changing the fryer. It checks the potatoes first and confirms that cold storage is driving low temperature sweetening. It asks the supplier to hold the next lots at 8 °C with a sprout suppressant its EU buyer accepts (chlorpropham is no longer approved in the EU), and reconditions the stock already received at 13 °C for three weeks. It introduces a fry colour test on every delivery and adds an optical sorter setting for dark crisps.
It also lowers the fryer exit temperature and lengthens the dwell time so the crisps still reach their moisture specification, then checks oil content, texture and shelf life before signing the change off. A triangle test against the current product confirms that customers will not notice a difference in taste.
A second test after the changes reads 520 µg/kg, about 31 per cent below the benchmark. The team adds acrylamide to the hazard analysis, assesses it as significant for this line, and manages storage temperature, fry colour and fryer exit temperature as OPRPs with action criteria and records. It schedules testing whenever the supply region changes. The figures are illustrative, but the order of work is the one we recommend: raw material, process, then recipe, with a test before and after each change.
If your own result looks like that first test, send it to our food scientists and we will tell you which of those steps to take first.
How often should you test for acrylamide?
Regulation 2017/2158 asks for sampling and analysis at least once a year for products whose acrylamide level is known and well controlled, and more often for products with a potential to exceed the benchmark. Test at the worst point of your year, which for potato products is when cold stored lots are in use and for bakery is when a new flour crop arrives.
Use a laboratory with acrylamide on its SANAS ISO/IEC 17025 scope, usually by LC-MS/MS or GC-MS, and send a composite of several production lots rather than one pack. Check its limit of quantification: Annex III asks for 50 µg/kg or lower where the benchmark is 125 µg/kg or more, and no more than two fifths of the benchmark below that. Our guide to choosing and using a food testing laboratory explains what else to ask.
Between tests, use colour as your daily control. Annex III allows colour or process measurements in place of some analysis once a statistical correlation with acrylamide has been shown, so build that correlation for each product. A colour chart or colorimeter on the line is then the cheapest acrylamide check you have.
Reducing acrylamide often means reformulating, and the same skills apply as in sugar reduction, which our guide to cutting sugar in drinks and snacks sets out. For the people who own your process, our Advanced Food Science course covers Maillard chemistry in depth, including a game that has you rebuild the Maillard cascade.
Why food businesses choose ASC
Rated 4.9 out of 5 from more than 400 Google reviews across our three offices.
Gqeberha Google reviews Johannesburg Google reviews Cape Town Google reviews
Our online courses hold a 4.9 average from 2,660 course reviews and more than 7,200 course enrolments.
ASC is ISO 9001 certified, a SAATCA registered online training course provider (TC 065), FoodBev SETA Accredited Provider No. 587/00337/1900 and an Exemplar Global Recognised Training Provider.
Bring your acrylamide down
Food science and technology support from ASC
Our food scientists review your raw material, storage, cooking profile and recipe. They read your test results, set colour and process limits for the line, and write the acrylamide entry for your hazard analysis against ISO 22000:2018 clause 8.5.2, the clause FSSC 22000 audits examine. We run process validation and reformulation trials when the fix needs them. We do not run our own laboratory, so testing is placed with accredited laboratories and we stay independent of the result we interpret. A few hours of consulting costs less than one rejected export consignment. Free, no obligation quote. Consulting is charged hourly, and a full project is quoted once the scope is agreed.
Send your results for a free quote WhatsApp our food scientists
Want your technologists to own the chemistry? The Advanced Food Science course (R7,750, Level 5 for science graduates, about 25 hours online).
Questions we are often asked
What causes acrylamide in food?
Mainly the reaction between the amino acid asparagine and reducing sugars such as glucose and fructose in the Maillard reaction, at temperatures usually above 120 °C and at low moisture. Frying and baking produce most of it, with roasting close behind.
Does South Africa have a legal limit for acrylamide?
No South African regulation sets a maximum level for acrylamide in food. Certified food safety systems are still expected to address it in the hazard analysis, and EU buyers will apply Regulation (EU) 2017/2158 to products exported there.
What is the EU benchmark for potato crisps?
750 µg/kg for potato crisps made from fresh potatoes or potato dough, and 500 µg/kg for ready to eat French fries, under Annex IV of Regulation (EU) 2017/2158. Benchmark levels are performance indicators, not legal maximums.
Does a lighter colour always mean less acrylamide?
For fried potato and most baked goods, colour tracks acrylamide well within one product and process, which is why colour charts work as a daily control. It does not hold for coffee, where darker roasts often contain less acrylamide than light ones. Confirm the link with laboratory results on your own product.
Sources
- Codex Alimentarius Commission, Code of Practice for the Reduction of Acrylamide in Foods, CXC 67-2009
- European Commission, Commission Regulation (EU) 2017/2158 establishing mitigation measures and benchmark levels for the reduction of the presence of acrylamide in food, Annexes I to IV
- European Commission, Acrylamide, food safety contaminants catalogue
- EFSA Panel on Contaminants in the Food Chain, Scientific Opinion on acrylamide in food, EFSA Journal 13(6):4104, June 2015

